Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at FRITO-LAY, INC., 10 Spud Lane, BINGHAMTON, NEW YORK 13904
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was adjusting the blade on a cutter-mixer machine when the blade engaged while their right hand was inside the mixer. The employee suffered a laceration to their thumb and an amputation of their index finger.
AmputationFinger(s), fingernail(s), n.e.c.Mixers, blenders, whippers-food and beverage
An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.
An employee was working to clear a jammed box in a box drop area. The employee's left thumb was caught and amputated between a box drop tray and a support bar.
An employee slowed his forklift in a warehouse aisle as another forklift turned from an intersecting aisle. The employee's left arm was pinned between the two forklifts. The employee developed compartment syndrome.
An employee adjusted a pallet on racking and was walking back to their parked stand-up forklift when they were struck by another stand-up forklift. The employee fell into the racking system and sustained a fractured pelvis and ribs.
An employee was walking while doing product inventory. The employee slipped and fell on metal decking and sustained a laceration to their left shin and calf area. The employee required hospitalization and surgery.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
While attending the slab line, an employee observed that dough was accumulating on the plastic blades. He proceeded to clean the blades. His left index finger came into contact with an adjacent blade that moves laterally (left to right), resulting in a partial amputation.
A sanitation employee entered the chemical room and slipped on the wet floor. When he slipped, he kicked over a bucket containing cleaning chemicals. The chemicals splashed onto the employee's clothing and burned his skin.
An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.
An employee had just finished unloading material from a truck. He was descending using the truck's built-in ladder when he missed the last rung, fell to the ground, and broke his hip and left wrist.
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.