Tecomet

An employee got up from her desk, tripped over a box that was next to her work station, and fell resulting in a broken hip that required hospitalization and surgery.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

On August 15, 2025, an employee was in a small room right before the exit. The door in the little room was locked. The employee climbed over a wall and hopped down to the other side, falling and resulting in a twisted right ankle. The employee was hospitalized.

On August 14, 2025, an employee was assembling cables using a molding machine. When the machine was engaged, the mold came down and caught the employee's left hand, amputating three fingers.

On August 8, 2025, an employee was operating a table-top injection molding machine. He refilled the barrel of the machine with resin and began a pack procedure in which the plunger of the machine moved into the barrel to compress plastic pellets into the mix. The plunger caught and amputated his fingertip.

An employee was entering the manufacturing area when their finger became caught between a door and the door frame, resulting in an amputated finger.

An employee was working to move a pallet jack that had gotten stuck between the dock and the trailer. When the equipment was loosened, it struck the employee, throwing them backward onto the ground. The employee sustained fractured ribs and injury to their spleen and liver.

An employee slipped while climbing a ladder on a skidder, fell to the ground, and suffered a tibia/fibula fracture. The employee was hospitalized.

An employee was lowering the bucket of a track loader that contained a grade stake and the grade stake punctured his foot, resulting in hospitalization and surgery.

An employee was using a pike to move a pallet of sugar that was stuck in the powder racking. The employee fell backward, landing on his right leg. The employee's leg was fractured and he was hospitalized.

An employee was working to fix the forks on a forklift when the fork(s) fell on her toes. The second and third toes on her right foot were fractured, lacerated, and required stitches.

An employee was delivering a 65-foot boom lift to a rental customer's construction site. The employee set up the ramp truck in the parking lot adjacent to the construction site. He elevated the boom 4-5 feet to clear a temporary fence. While driving the boom lift off the ramp, the wheels slid to the driver's side of the ramp truck, ultimately sliding off the ramp. The boom lift fell off the side of the truck and rolled onto its side. The employee sustained a fractured clavicle, a dislocated shoulder, separated/fractured ribs, a punctured lung, and a fractured left femur. The employee required surgery.