Schneider National

While operating a standup fork truck, an employee struck a racking system. The employee's right foot was caught between the fork truck and the rack, fracturing it.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

An employee was hooking up a set of 28-foot trailers, attaching a converter dolly to the lead trailer's pintle hook. He backed up the lead trailer and parked it a foot from the converter dolly, then lifted the converter dolly and rolled it to the lead trailer to set it onto the hook. The converter dolly kicked up, and the employee's left hand was caught between it and the trailer. He suffered a severe laceration to the palm between the ring finger and middle finger.

An employee was cleaning the windshield of his truck. When he stepped down from the truck, he lost balance and reached to catch himself using the side mirror. The impact fractured his left wrist. The employee was hospitalized and required surgery.

An employee was standing on the DOT bumper on the back of a standard 53-foot trailer. The employee lost his footing and his grip on the handle bar, and fell approximately 42 inches to the ground. The employee was hospitalized with a fractured left hip/femur.

A driver was making a delivery. As he was climbing onto his trailer to get boxes, the strap he was using to pull himself up broke. He fell from the back of the trailer to the ground, landing on his right leg and breaking his femur.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.