Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at International Paper Company, 100 DICKMAN RD., BAY MINETTE, ALABAMA 36507
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working on a die cutting machine. While he was operating the turntable, he contacted the point of operation and suffered a fingertip amputation.
AmputationFingertip(s)Paper production machinery, n.e.c.
More severe injuries at International Paper Company
An employee was troubleshooting a plug on a starch silo chute. The employee was caught by the internals of the rotary valve resulting in amputations to the tips of their right first and second digits.
On February 11, 2025, an employee began to drive a clamp-type forklift away from a propane fueling station. The forklift was still connected to the fueling station and the connection line broke. This caused a flash fire, and the employee suffered second-degree burns to both arms and minor burns to his face.
On January 22, 2024, an employee was working at an inspection door on a feed screw auger. He was pushing debris into the auger when his left foot was caught in the auger, resulting in a fracture and the amputation of two toes.
An employee was removing a roll core from a chuck. The machine activated while the employee's right thumb was between the chuck and the roll core. The employee sustained an amputation to the right thumb tip.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 322211)
On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.
An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.
An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.
An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.
An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.