MPW Manufacturing Services, LLC

On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.

An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.

An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.

An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.

An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.

An employee was replacing a water check valve at a water plant. He was lifting the valve with two hands when it slipped and contacted his right ring finger, resulting in a partial amputation without bone loss.

The injured employee was assisting with hitching a trailer to a truck. The employee was working to engage the lunette ring on the trailer with the pintle hook on the truck. A mini-excavator began driving onto the rear of the trailer. The added weight caused the rear of the trailer to lower and the front to rise, creating a pinch point between the trailer and the truck. The employee s left thumb was caught in the latch mechanism of the pintle hook. The thumb tip was partially amputated and required surgery.

An employee was spraying down an area by a conveyor he had been using. Moving parts (such as rollers and chains) inside a gear box amputated his right arm at the elbow. The employee was hospitalized.

An employee was adjusting a machine attached to a tractor that rolls out hose into a trench. The machine lowered to the ground and part of it landed on his big toe, amputating it.

An employee was stung by a bee while working in the field. The employee suffered an allergic reaction and was hospitalized.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.