Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

Holt Tecas Ltd. dba Holt CAT

Struck by swinging or slipping object, other than handheld, n.e.c. · Fractures

Federal OSHA recorded a severe workplace injury at Holt Tecas Ltd. dba Holt CAT, 5665 SE Loop 410 Acc. Rd., SAN ANTONIO, TEXAS 78222 on — Fractures, affecting the pelvic region, unspecified.

Watch Holt Tecas Ltd. dba Holt CAT — free Get an email when a new federal OSHA severe-injury report for Holt Tecas Ltd. dba Holt CAT is published. One employer, no account, unsubscribe in one click.

An employee was reassembling the roller frame of a bulldozer. The roller frame was suspended from an overhead crane and bolted to the frame of the bulldozer. The employee was aligning the equalizer pin to reattach the roller frame, which was hung up on the equalizer bar. He was under the suspended roller frame, trying to use a sledgehammer to drive the equalizer pin out; when the pin was struck, the frame shifted off the equalizer bar downward about 4-6 inches and struck his left hip area. He suffered a fracture to the pelvic region.

Hospitalized Pelvic region, unspecified Cranes-gantry, overhead, monorail, container

InterCon Construction, Inc.

A crew was pulling a 4-inch plastic gas pipe off a reel and straightening it for installation. The injured employee stepped up on the trailer to cut the last band holding the pipe in the coil on the reel. As he turned to step off the trailer, the end of the pipe rotated and sprung out of the cage surrounding the coil, striking the employee on the side of the head and knocking him off of the trailer into the roadway. The employee suffered head trauma that required hospitalization.

RAVA Construction, LLC

An employee and a co-worker were performing a pick inside a clear well. They rigged the skid pan that was full of broken concrete. When lifting, the load began to swing toward a wall. The employee tried to stop the skid pan from swinging and was struck by the pan, resulting in fractures to their left hip and wrist.

Stein, LLC

The employee had just completed refueling a lattice crane that was breaking up material and was winding the fuel hose back into the fuel truck when he was struck by the catwalk/stairs of the crane. The employee was hospitalized with a laceration to his backside, possible internal bleeding, and a broken hip.

7 Site & Utility, LLC

An employee was fusing 10-inch black rubber utility pipes together using a pipe fusion machine and could not get the pipes to set correctly. The employee used a nylon strap attached to an excavator to lift one side of a pipe off a steel plate. As his hand was between two pipes, the pipes came back together, partially amputating two of his fingers.

Sterling Steel Company, LLC

An employee was lifting four bags of a lime blend weighing approximately 10,000 pounds using a crane. The load swung and pinned the employee against a structural I-beam, resulting in fractures to the hip and pelvis.

Holt Texas, LTD.

An employee was working on a 6-foot ladder that was leaned against a gas compression engine. The ladder feet slipped on the working surface, causing the ladder to become unstable. The employee fell off the ladder and suffered bilateral wrist fractures.

LINDER INDUSTRIAL MACHINERY COMPANY

An employee was reinstalling an idler weighing approximately 400 lbs. on a bulldozer when the idler shifted slightly, pinching the employee's finger. The employee sustained an amputation.

Tractor & Equipment Company

An employee was filling a pressure washer with gasoline when the vapors ignited, resulting in the employee suffering burns to his face, hands, and arms.

ProDrivers

An employee was preparing to unload freight from the liftgate of their truck while at a client location. They stepped into a pothole and fell onto their left side, resulting in a broken hip that required hospitalization and surgery.

Tractor & Equipment Company

An employee was using a torch to remove a broken bolt from inside a roller drum. Prior to this, brake cleaner had been used inside the roller drum. The employee was inside the roller drum when a flash fire occurred and the employee sustained burns to their face and arms.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.