Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at WestRock, 1913 FM 105 S., EVADALE, TEXAS 77615
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was transporting a trash hopper to a dumpster using a forklift. While emptying the trash hopper into the dumpster, the employee's right hand was on the dumpster latch and his left hand was on the base of the hopper. When the employee released the latch, the hopper tilted forward while the rear of the hopper lifted upward, compressing the employee's left little finger between the hopper and the dumpster. The employee suffered a partial traumatic transphalangeal amputation.
AmputationFinger(s), fingernail(s), unspecifiedForklift, order picker, platform truck-powered
An employee was clearing the clean-up chain with a stick when he fell backward into the cut-off saw area. His arm struck against the saw, resulting in severe lacerations. The machine was unguarded at the time.
An employee was pumping overflowing process water when they stepped in an open hole containing hot process water, resulting in second-degree burns to their ankle.
An employee was clearing a jam in a piece of equipment used to process paperboard scraps when their right hand contacted blades in the equipment, resulting in the amputation of two fingers.
An employee was operating a gluer machine. The employee's left hand was caught in the feed section of the machine, resulting in the amputation of the hand.
An employee was running a load tiering device. As the employee was trying to remove a piece of strap that was lodged or caught in the machine, the forks caught his right hand. He suffered a broken middle finger and lacerations to the palm and back of the hand. He was hospitalized, requiring surgery.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 322130)
An employee worked in the paper machine area for a shift, cutting corners off paper rolls around the roll machine. Afterwards, the employee sustained cramping and dehydration due to heat. The employee was hospitalized.
An employee was adjusting a trim sheet leading to a sheeter machine. Their glove became caught in the machine and the shearer closed on the employee's right hand, crushing it and breaking the hand and wrist.
An employee was troubleshooting a process upset. A nearby refiner had a pressure spike, causing the housing to separate slightly, which allowed the loss of primary containment. The employee was sprayed by hot water, resulting second- and third-degree burns on his torso and left arm.
On July 22, 2024, at 10:30 AM, an employee was responding to a pulp mill manufacturing process shutdown. Pulp stock overflowed through an engineered overflow pipe resulting in a buildup of stock in a bermed area. The stock was 140 to 150 degrees. The employee went to the bermed area to close an air-actuated process valve. While closing the valve, pulp stock entered the top of his boots and caused second-degree burns to both of his lower legs down to his feet. The employee was hospitalized.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.