Cactus Wellhead LLC

An employee was cutting a casing pipe when a piece of the casing struck him in his left eye, resulting in an injury.

On 6/20/2023, at approximately 12:20 PM, the injured employee was working on a decompletion at a well. A rig crew had set a blow out preventer (BOP) on the wellhead, and the injured employee was torquing the nuts when a spark came out from the side of the torque unit and ignited a flash fire. The employee was engulfed by the fire and sustained first degree burns to their face and second degree burns to both hands.

An employee was operating a machining mill. While loading a new piece of material into the machine, the employee brushed off metal shavings from the top of the machine and their left hand was caught between the piece of material and tailstock of the machine. Their left middle and index fingers were crushed and the middle finger required surgical amputation.

An employee was working on a frac tree. The tree fell, catching the employee on the leg and breaking it.

After work (installing wellheads and valves in the field), an employee suffered severe heat exhaustion and cramping and was hospitalized.

An employee was pushing a patient in a wheelchair up a ramp when she felt a sudden pain in her middle and lower back, resulting in hospitalization.

An employee sustained a hernia while manually pulling on a dock plate that was stuck against a trailer. The employee was hospitalized.

An employee was pushing tables together to seat a party of 20 when he felt a sharp pain and experienced difficulty breathing. The employee was hospitalized for a collapsed lung.

An employee was walking and pushing a basket with cardboard on it when she felt her left knee crack. The employee's left femur was broken.

On August 27, 2023, an employee was rolling a 55-gallon drum of diesel fuel off a pallet and injured his back. The employee was hospitalized.

Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.

An employee was fitting an arbor fixture into a rotor housing to be reworked. The rotor is moved by a hoist. The arbor was being lowered into the rotor housing when the arbor slipped down onto his hand and amputated a portion of his left thumb.

An employee was operating a brake press when his left hand was caught in a pivot point and fractured.

A crew was tripping out of the hole with an electrical submersible pump (ESP) in the process of swapping tubing tong heads to break down the ESP. An employee's left arm was caught and pinched by the tubing tongs. The employee sustained three lacerations and a fracture to the arm.

On May 21, 2025, at approximately 3:40 PM, a machinist was preparing a CNC lathe machine for it's next run. He was closing the machine door to complete the tooling setup when the door crushed his right middle finger. The employee required a surgical amputation to his fingertip.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.