Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at DHL Express Gateway, JFK International Airport South Cargo Road, JAMAICA, NEW YORK 11430
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was preparing to put a filled unit load device (ULD) onto an inflow rack. The ULD was pressed against one of the locks, so the forklift operator lifted the ULD so that the injured employee could move the lock. As the ULD was moved by the forklift, the employee's middle fingertip was pinched between the dolly lock and the unit load device, resulting in a left middle fingertip amputation.
HospitalizedAmputationFingertip(s)Forklift, order picker, platform truck-powered
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 492110)
An employee was moving a large package from a slide when her left arm got caught between the slide (tilt tray) and the package. She was hospitalized with a fractured left arm.
An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.
An employee was sidestepping along the catwalk of a railcar when he lost his balance and fell approximately 4 feet to the ground. The employee's right hip was fractured.
An employee was working to realign the two top sections of a set of collapsible rollers (trailer-on-flatcar rollers). The rollers suddenly fell into place and pinched her left index fingertip against the lower sections. She suffered a partial amputation to the fingertip.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.