Caught in running equipment or machinery during maintenance, cleaning · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Brentwood Originals, Inc., 9759 Church Rd W., WALLS, MISSISSIPPI 38680
on — Fractures, affecting the arm(s), unspecified.
Final narrative
An employee was operating a pillow blower when it became jammed. Upon removing the fiber jam, the employee became caught in the picker and sustained multiple fractures to the right arm.
HospitalizedArm(s), unspecifiedTextile, apparel, leather production machinery, unspecified
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 314129)
An employee was using the roll buffer machine to buff cots at the yarn plant. They were using an air hose to blow off the cots and suffered partial amputations to their left index and middle fingers from the buffing wheel.
An employee was performing maintenance and removing fibers from a chain and sprocket. Slight pressure on the chain caused the sprocket shaft to spin freely. The employee's right hand was caught in the chain and sprocket, partially amputating their ring finger.
An employee was repairing a yarn break. A filament of yarn waste from a package wrapped around the employee's thumb and a nearby, rotating, pre-tensioning shaft. Due to the strength of the filament yarn, the employee's right thumb was partially amputated.
An employee was operating the fill machine when the machine became clogged with fill. As the employee was removing the clog, the machine blades lacerated his right index and middle fingers resulting in amputation of the middle fingertip.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.