Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Tokai Carbon CB, LTD., 9455 FM 1559, BORGER, TEXAS 79007
on — Heat (thermal) burns, unspecified, affecting the nonclassifiable.
Final narrative
An employee was examining a leak in a steam line when hooking it to an oil car. The employee was burned by the steam.
An employee was operating a forklift in the shipping warehouse. Carbon black residue along with moisture caused the concrete flooring to be slippery. When the employee applied the brakes, the forklift began to slide. As the employee turned the forklift to avoid striking a vertical support beam, his left hand was caught between the support beam and the support bar of the forklift cab. The employee sustained fractures to four fingers and two bones in the palm, as well as a laceration in the palm area.
An employee was attempting to open the lid on a oil car from a fixed ladder approximately 11-12 feet above the ground. The employee slipped and fell off the ladder to the ground below, resulting in a torn muscle in their right arm and an oblique fracture in their right leg.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325182)
An employee was using a metal scoop to pull a product sample from an enclosed conveyor belt. The scoop became caught on the conveyor and the employee's left thumb was pinched between the conveyor housing and the scoop. The distal phalanx of the thumb was amputated.
An employee was attempting to open the lid on a oil car from a fixed ladder approximately 11-12 feet above the ground. The employee slipped and fell off the ladder to the ground below, resulting in a torn muscle in their right arm and an oblique fracture in their right leg.
An employee was removing a damaged boiler door using a chain hoist. The door slipped off the hinge and pinned the employee's left thumb, crushing and partially amputating the tip. The employee was hospitalized and another part of the thumb was surgically amputated.
An employee was helping a forklift operator stack empty sacks on a pallet. The forks of the fork truck were raised, and the employee's right index finger became stuck in an open hole in the fork, amputating his fingertip.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.