SERVICE TIRE TRUCK CENTERS

An employee was checking the air pressure on a pressurized tire when the bead popped off and the tire struck their hand, resulting in a crush injury that required hospitalization and surgery.

An employee was rotating a tire using a tire rotation machine when their leg was caught on the tire, resulting in a leg fracture.

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

An employee was helping unload steel slit coils on a slitting line, using an overhead crane with a C-hook. The coil did not fit properly onto a turnstile. Another operator went to remove the coil from the C-hook using a forklift while the employee held the C-hook steady. The forklift contacted the coil, causing it to fall from the hook. It landed on the employee s foot, breaking four bones. The incident took place during a training activity.

An employee was trying to open the stuck tailgate of a truck. When he pulled on it, it gave way, causing him to fall back and hit his head on the pavement. He suffered a head laceration/contusion.

An employee was mounting an ATV tire. As he was inflating it, the rim came out of the tire and struck his right leg, breaking it below the knee.

On July 25, 2025, an employee was lowering a vehicle on a lift. The employee's right index finger was caught in the lift and partially amputated.

An employee was performing a repair and using a radial arm saw when they lacerated their index finger. The employee was hospitalized with an infection.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.