Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at MCCABE, HAMILTON & RENNY CO., LTD., Pier 2, HONOLULU, HAWAII 96817
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was loading pallets into a shipping container using a forklift. As he was using a piece of wood to push in a pallet and close a gap, his hand became stuck between the wood piece and the pallet. He suffered a finger injury while removing his hand that required medical amputation.
An employee was using a loader to unload coal from a vessel when the loader bucket contacted the bucket system moving the coal out of the vessel. The bucket system then lifted the loader, throwing the employee to the deck of the vessel. The employee suffered shoulder and head injuries, requiring hospitalization. A seat belt was not worn at the time of the incident.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 488320)
While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.
An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.
An employee was on a 6-foot A-frame ladder, working to replace ceiling tiles. They fell to the ground and sustained fractures to their hip and femur. The employee was hospitalized and required surgery.
An employee was installing shoring and stepped on a 2x4 that was running across the top of a trench. He fell through and was hospitalized with a fractured left femur.
An employee was securing a ramp to a dock to unload cargo. He was using large pins to put the ramp in place when two of his fingers got caught in the ramp, resulting in a partial amputation.
An employee was helping to dismantle a mobile crawler crane. Employees were separating boom sections. When the last pin was hammered out, the 40-foot boom section dropped 4-5 inches onto the injured employee's left foot. All five toes were amputated and the employee was hospitalized for surgery.