Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at D-MAC Industries Inc, 1880 D-Mac Drive, ALPHARETTA, GEORGIA 30004
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was brushing out metal shavings from the slug slot when one of the spring-actuated hold-downs on a metal deck cutoff die was stuck in the up position. The die was removed from the press and the employee brushed away metal shavings. The employee's left hand was on the die while another employee began loosening a bolt on top of the die. The hold-down that was stuck then broke loose, crushing portions of his index, middle, ring, and little fingers on his left hand that required surgical amputation.
AmputationFinger(s), fingernail(s), unspecifiedMetal, woodworking, and special material machinery, unspecified
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 423840)
An employee was standing on the back of a flatbed truck while a forklift was being used to load a shelving unit onto the truck. The shelving unit slid off and struck the employee, who suffered contusions to the head and collarbone area.
An employee was operating an order picker that was raised 20 inches when they stepped backward and fell off the platform to the concrete floor. The employee struck their head on the floor, resulting in hospitalization with a head injury.
An employee was operating a side loader designed for narrow aisles to pick up pans filled with steel, which include 12-foot pans and others with 20-24 foot pans. The employee pulled the required amounts from the pans using a crane, and then packed and labeled the items for shipment to the loading dock. The side loader struck a pan, causing the cab to detach and land on the employee's leg, resulting in a fracture.
A delivery driver was helping a customer unload a strut. The banding around the strut broke loose and lacerated the employee's lower left leg. The employee was hospitalized and required stitches and surgery to repair the patellar tendon.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.