IPM Foods, LLC

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

An employee was moving three stacked bins with a pallet jack in the centering room. While turning, the bins struck a wall-mounted control panel, causing an unopened kettle behind the employee to open. Heated bone broth was released. The employee went to close the kettle and came in contact with the hot broth (approximately 200 degrees) resulting in second-degree burns to their legs.

An employee was emptying a strainer into a floor drain in front of a kettle in preparation for broth to be pumped from the kettle. The kettle was tilted and hot broth poured onto the employee, whose neck, back, and foot were scalded.

On January 26, 2025, at 1:30 p.m., an employee was replacing a temperature probe in a sterilizer and was burned by residual hot water and steam within the line. The employee was hospitalized for first- and second-degree burns to the face, neck, and arm.

An employee was working on a condenser in the power plant. He was pulling on the belts when a belt amputated their left ring fingertip.

An employee was using an onion peeler. As they went to remove stuck onion peels, the onion peeler caught their glove and pulled their hand in. The employee was hospitalized and required skin graft surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.