Matson Navigation Company of Alaska, LLC

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.

An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.

An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.

An employee was assisting with pre-welding setup on pile structures at the fuel dock worksite. They were working to operate a come-along to align a waler to the pile. Due to limited leverage and restricted positioning within the man basket of the crane, the employee exited the basket to manually adjust the waler from the structure itself. During the task, wave height and frequency increased. A large wave struck the area, causing the pile braces and walers to shift. The employee lost their footing and grabbed the production pile edge. Their fingers on one hand were crushed between two structural steel piles. The employee sustained an amputation to the fingers and was hospitalized.

An employee was lifting a manhole cover when it fell on his right foot, resulting in the amputation of his big toe and the adjacent toe.

An employee was in a tunnel freezer, which was being turned on for the first time. The baffling for the evaporator fan got stuck in the siding. The employee ascended a 5'9"-tall cart to reach the raised baffling panel. The raised baffling shifted and dropped, trapping the employee's arm between the aluminum and foam core baffling. The employee sustained a severe laceration to the lower forearm/upper wrist and severed ligaments. The employee was hospitalized.

An employee was engaging in daily physical training in preparation for fire season as a smokejumper. The employee sustained swelling and stiffness in their arms and was hospitalized with rhabdomyolysis.

An employee was training and running and suffered rhabdomyolysis.