Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Cutco Corp., 1116 East State Street, OLEAN, NEW YORK 14760
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was servicing a transfer polishing machine. He was using a prybar to align a rail system when the prybar slipped and the equipment came down on his left hand. Their middle fingertip was amputated.
Employees were upgrading lighting fixtures in the accounting offices. The injured employee was on a ladder working on a ceiling light fixture. He came into contact with the metal grating surrounding the fixture and sustained an electrical shock that caused him to lose balance and fall approximately 3 to 4 feet to the floor. The injured employee sustained a fractured pelvis and a torn rotator cuff.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 332215)
An employee was working to retrieve finished wire from a wire bender. The employee's right middle fingertip was caught between the blocks on the wire bender. The fingertip was amputated.
Employees were upgrading lighting fixtures in the accounting offices. The injured employee was on a ladder working on a ceiling light fixture. He came into contact with the metal grating surrounding the fixture and sustained an electrical shock that caused him to lose balance and fall approximately 3 to 4 feet to the floor. The injured employee sustained a fractured pelvis and a torn rotator cuff.
An employee was operating a 12" disc sander when the metal part he was working on got caught and it pinched and lacerated his left thumb and then popped up and struck his upper lip. This resulted in an amputation to the left thumb.
An employee was working at a hydraulic press. As he moved blanks in or out of the press, his left index finger was caught and crushed in its point of operation. The finger was medically amputated.
An employee was standing on a forklift/picker platform, retrieving product from a third-tier shelf. He fell about 15 feet, suffering a broken wrist, broken ribs and a head wound that required stitches. The employee's lanyard was not connected at the time of the fall.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.