Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at JAMAS Enterprises, LLC, 3407 Walters Road, SYRACUSE, NEW YORK 13209
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was adjusting a cable on an overhead door. After releasing the overhead door braking mechanism, the overhead door raised approximately 2 feet while the employee was holding the cable. The employee's fingers were amputated when they were pulled between the cable and bar.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 423810)
An employee was working on a 6-foot ladder that was leaned against a gas compression engine. The ladder feet slipped on the working surface, causing the ladder to become unstable. The employee fell off the ladder and suffered bilateral wrist fractures.
An employee was reinstalling an idler weighing approximately 400 lbs. on a bulldozer when the idler shifted slightly, pinching the employee's finger. The employee sustained an amputation.
An employee was filling a pressure washer with gasoline when the vapors ignited, resulting in the employee suffering burns to his face, hands, and arms.
An employee was preparing to unload freight from the liftgate of their truck while at a client location. They stepped into a pothole and fell onto their left side, resulting in a broken hip that required hospitalization and surgery.
An employee was using a torch to remove a broken bolt from inside a roller drum. Prior to this, brake cleaner had been used inside the roller drum. The employee was inside the roller drum when a flash fire occurred and the employee sustained burns to their face and arms.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.