Hope Baking Company, Inc.

On October 24, 2023, an employee was working in the bread department on the production line. As they went to remove dough that became stuck on the roller, the fingers on their right hand were crushed.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee (who had recently walked through water accumulated on the floor) slipped and fell to the floor. The employee suffered a broken right wrist and right elbow and was hospitalized, requiring surgery.

An employee was performing maintenance on a production line, requiring a testing and positioning phase for the whipped cream dispensers. The employee was positioning the dispensers using wrenches when one of the sensors was triggered by the pie pans coming down the line. The depositor heads lowered and pinched the employee's left ring finger, resulting in an amputated fingertip. The whipped cream dispensers were not guarded at the time and the line was not locked out/tagged out.

During a line changeover, an employee was rinsing a depositor with water. The employee was working to remove a piece of chocolate, stuck in the machine's roller, when the roller's moving parts caught his middle finger. He suffered an amputation to the fingertip with bone loss.

An employee was emptying a trash can into a dumpster. He tripped while turning around, fell over a rail onto the concrete floor, and broke bones in his back and wrist.

During a changeover, an employee was wiping down the dough chunker machine and the chunker closed on his left hand. The employee sustained crushing/laceration injuries, requiring hospitalization and surgery.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.