SGL Carbon, LLC - Saint Marys

An employee was performing maintenance inside a furnace when they lost consciousness due to the oxygen-deficient atmosphere. The employee was hoisted from the space and also sustained a leg fracture.

An employee was changing out a standard chuck and installing a collet chuck on a small twin spindle lathe. While attempting to take off the first chuck, the employee stepped on the foot pedal, which actuates the hydraulic draw tube and separates the chuck from the face plate. He placed his fingers between the chuck and face plate and attempted to unthread the chuck from the draw tube. While he was unthreading the chuck, the lathe was activated via the foot pedal. The chuck then drew back toward the face plate, crushing his fingertips. His left middle, ring, and pinky fingertips were amputated.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was working on a snow plow, trying to free a spring that had become struck when their finger was pinched in the springs on the snow plow. When the spring released, it amputated the fingertip.

Employees were making a grade change to a spray dryer system. Water pressure blew a strainer lid off as one employee was trying to open it; it struck the employee's face, causing fractures to their face and forehead on the left side as well as a cut above the left eye.

An employee was was descending from an excavator. The employee's hands slipped and they jumped, landing on their left foot and suffering a compound fracture to the lower left leg.

An employee was performing maintenance inside a furnace when they lost consciousness due to the oxygen-deficient atmosphere. The employee was hoisted from the space and also sustained a leg fracture.

While walking around a forklift, an employee tripped on its forks and fell on the floor, sustaining a dislocated shoulder.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.