Canfor Southern Pine, Inc.

A maintenance employee was assisting in the replacement of a cylinder for a de-barker's kicker at the crossover deck. The employee was using a chain hoist to re-position the log kicker when the log kicker suddenly moved, releasing the chain hoist. The log kicker fell and struck the employee's left leg causing an open tibia and fibula fracture.

An employee was straightening a board at the infeed to an unscrambler at the planer mill. As the employee was trying to dislodge the skewed board, the weight shifted on another board, causing the employee's left little finger to become pinched between the two boards. The employee suffered a partial amputation.

A maintenance employee was visually inspecting a stacker package maker to troubleshoot a reported issue. He placed his right leg inside the roll case area of the machine to obtain a better visual. As he was looking upwards in an attempt to identify the issue, the stacker activated and a package of wood came down the roll case area and struck the employee's right leg. The employee sustained fractures to the right tibia and fibula.

An employee was monitoring a section of production between the trimmer and edger saws when he noticed boards were jamming on the overhead conveyor between the saws. He stepped up onto a sheet metal barrier that was 22 inches high and then slipped and fell. His face struck an electrical closure (junction box) that was near the ground, fracturing his jaw and requiring hospitalization.

An employee was working near an open metal door at the shaving bin. The door swung closed and struck the employee on the head.

An employee was cleaning a cordless drill. As they applied brake fluid to the drill and pulled the trigger, the fluid ignited. The employee suffered burns to the face, hands, and arms.

An employee was spraying glue to the floor of an enclosed cargo trailer. The fumes made contact with the heater causing a flash fire. The employee suffered burns to their face and right hand.

An employee was replacing a valve in the gas line to the fryer. The shutoff valve malfunctioned resulting in a gas leak that then ignited. The employee sustained burns requiring hospitalization.

An employee was using a torch when a hole in the oxygen line leaked gas that then ignited. The employee sustained burns to the left palm and wrist.

An employee was using an oxy-acetylene cutting torch to work on a damaged piece of equipment that needed to be welded. The employee noticed the cutting torch was not functioning normally. He was trying to determine the problem when a burst of fire occurred, caused by gas leaking from the torch. The employee sustained burns to the throat.

An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.

An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.

An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.

An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.

While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.