Struck by other falling object n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Burnham LLC, 1237 Harrisburg Pike, LANCASTER, PENNSYLVANIA 17603
on — Amputations involving bone loss, affecting the Toes(s), toenail(s).
Final narrative
A crane was being used to lay a piece of material flat on the ground for shipment. The piece came loose from the crane's plate clamp and fell to the ground, severing part of an employee's left foot. The employee sustained toe amputations.
Amputation Toes(s), toenail(s) Parts and materials unspecified
An employee was operating a brake press to roll and form saddle pads when their left index finger was crushed between the small roller and a saddle pad.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was operating a drill press when their hand became caught in the drill and they sustained an amputation to the distal end of their right ring finger.
An employee was operating a hydraulic brake press when the machine cycled and came down on his right hand, resulting in cuts to his index, middle, and ring fingers. The employee sustained a medical fingertip amputation.
An employee was operating a drill press in the small parts department when their glove was caught in the drill press resulting in amputation of their right ring finger below the first knuckle.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.