105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Twitchell Technical Products, LLC.

Injured by object held or wielded by person · Cuts, lacerations, punctures without injury to internal structures

Federal OSHA recorded a severe workplace injury at Twitchell Technical Products, LLC., 4031 Ross Clark Circle, DOTHAN, ALABAMA 36303 on — Cuts, lacerations, punctures without injury to internal structures, affecting the Forearm(s).

An employee was using a utility knife to remove film from a roll of material for a coder machine when the knife became stuck. He pulled his arm back to free the knife. When the knife came free, it cut his left arm between the wrist and elbow.

Hospitalized Forearm(s) Box cutters, razor knives

Twitchell Technical Products, LLC.

An employee was attempting to unjam a pelletizer pull roller when the machine's fly knife blade drum amputated his right ring finger. The machine was unguarded and running at the time of the incident.

Twitchell Technical Products, LLC.

An employee was performing a quality control check on a loom and became lightheaded and lethargic. The ambient temperature was high and the employee was hospitalized for dehydration.

Twitchell Technical Products, LLC.

An employee was standing next to a pallet containing a box of yarn. The employee fell after twisting while unloading the box and broke his hip, requiring hospitalization.

View Twitchell Technical Products, LLC.'s full OSHA safety record →

Circle Graphics, Inc.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

Spellman High Voltage Electronics Corporation - Valhalla

An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.

CONTAINER GRAPHICS CORP

An employee was using a box cutter when it cut the tip of his left thumb resulting in a fingertip amputation.

Village Plumbing, Air & Electric

While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.

Rock Labor LLC

An employee was using the pipe-and-wrench method to loosen a seized bolt on a roof truss. A technician from another company was on the other side of the truss doing the same action with the same method. The employee's socket slipped off the bolt and his left hand was crushed against the truss, resulting in injuries to the index and little fingers, requiring hospitalization, surgery, and amputation of the index finger.

Mount Vernon Mills

On August 25, 2025, a machine operator was working on the heat-set end of a textile bleach/prep range machine. He was running leader cloth and it was bunching up. He climbed a catwalk so he could reach the cloth and flatten it out. His right hand was caught in a nip roll while adjusting the cloth. The employee's middle and ring fingertips were amputated.

Solmax Geosynthetics

An employee was making a fiber. He used his right hand to smooth the ends of polypropylene yarn and ensure they wrapped evenly onto a beam, spinning at 7 RPM. Some yarn got wrapped around his right middle finger and lacerated the finger and removed the nail, resulting in a distal amputation.

Propex Operating Company LLC

An employee was climbing down a ladder from the top of a machine 8 feet above the ground. He missed the second-to-last rung from the bottom and fell to the floor, suffering a broken right tibia and fibula.

MOUNT VERNON MILLS, INC.

On July 19, 2024, an employee was preparing to start the warp machine and was wrapping the yarned ends around the beam. Their right hand went behind the beam and between the press roll, bypassing the guard. When the machine started, it crushed their right hand. The employee was hospitalized.

Wolf Manufacturing Co

An employee boarded a forklift to move fiber when the vehicle caught fire. The employee was burned.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.