Compressed between running equipment and other object(s) · Fractures and surface, flesh wounds
At a glance
Federal OSHA recorded a severe workplace injury
at Hearthside Food Solutions, LLC, 312 Rader Rd., MC COMB, OHIO 45858
on — Fractures and surface, flesh wounds , affecting the Hand(s) and finger(s).
Final narrative
On February 25, 2024, an employee was cleaning dough off a roller when their right hand and fingers were caught in a pinch point between a laminator roller and conveyor resulting in fractures and lacerations.
Hospitalized Hand(s) and finger(s) Conveyors unspecified
More severe injuries at Hearthside Food Solutions, LLC
An employee was performing maintenance on a tray packer. They put a piece of cardboard down onto the belt of the tray packer and stood on the belt. The belt started, causing the employee to lose balance and fall approximately 2 feet. The employee was hospitalized with a fractured ankle and required surgery.
An employee was walking down a flight of stairs from a catwalk to a production area. The employee missed a step, fell down the stairs, and suffered broken ribs.
An employee was clearing a jam on a forming machine when their right hand was caught by the plunger, resulting in a partial amputation of the middle finger and a laceration to the back of the hand. The machine was guarded at the time.
On January 16, 2023, an employee was pushing a cr me tub under the vibratory system when her right-hand fingers were caught between the handle of the tub and the bottom of the vibratory system s framework. The employee sustained fingertip amputations to the third and fourth fingers on her right hand.
An employee was working to build an electrical substation. He was cleaning out the inside of a fixed section of a PVC pipe on the end that was furthest from an excavator. The excavator was outside of the trench and more than 25 feet away when it moved a pipe, pinching the employee's right arm between the two pipes. The employee's forearm was fractured.
An employee was anchored to a movable piece of equipment called a "lid" with a self-retracting lifeline harness. An overhead crane lifted the equipment, causing the employee to be pulled by his harness. The employee was pulled off the walkway and swung over the wall of the kiln. His body and head struck the wall. The employee lost consciousness and sustained a laceration to the side of his head that required stitches. The employee also sustained multiple fractured ribs and fractured vertebrae.
An employee was in a scissor lift, preparing to strip formwork from the underside of a concrete deck. As the lift was ascending, the employee's left little finger was pinched between the lift rail and the concrete beam above. The employee was hospitalized, and the soft tissue of their left little fingertip was amputated; the finger's bony tuft was also damaged.
An employee was operating an order picker when his left middle finger was crushed between the lift and storage racking. The employee's fingertip was amputated.
An employee was ascending in a scissor lift when his left thumb was caught between between the railing of the lift and a piece of equipment installed in the ceiling. The employee's thumb tip was amputated.
More severe injuries in this industry (NAICS 311821)
An employee was using an air hose to blow built-up dough off the rollers under the cutting apron on a conveyor belt line. The air stopped working and they went to manually remove the dough when their right hand was pulled into the pinch point between the apron and roller. The employee was hospitalized with a fracture to their right forearm that required surgery.
An employee was conducting maintenance work on an stainless steel auger feeder (flexible screw conveyor) in the seasoning room. The lower end of the feeder came loose from the hopper. The employee lifted the auger to position it when the auger feed initiated and energized the auger. His hands were pulled into the auger, resulting in hospitalization with a partial amputation of the right thumb.
An employee was walking down a flight of stairs from a catwalk to a production area. The employee missed a step, fell down the stairs, and suffered broken ribs.
An employee was troubleshooting a packaging machine. While adjusting the air pressure of the machine, the forming head triggered and the lever struck his left index finger. The finger was cut and the fingertip was amputated.
An employee was retrieving a pen that fell under a cross conveyor when her right arm became entrapped between the conveyor belt and the underside drive roller. Her forearm was fractured.
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.