Other fall to lower level 6 to 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Industrial Apparatus Service, 1320 Jim Gilligan Way, BEAUMONT, TEXAS 77705
on — Fractures , affecting the Trunk and other upper extremities.
Final narrative
An employee was standing on a ladder next to a motor to obtain a measurement reading from a dial indicator. The employee leaned over the motor and inadvertently leaned onto a overhead crane remote, causing the motor to fall toward the employee. The employee jumped from the ladder to prevent being struck by the motor and fell 10 feet to the concrete floor, resulting in a right rib fracture, a right scapula fracture, and contusions.
Hospitalized Trunk and other upper extremities Portable ladders and stairs unspecified
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
An employee was working on a platform, raised 6 to 8 feet in the air, to get something off a rack. The employee fell from the platform to the ground and sustained a head injury and injury to multiple body parts.
An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.
More severe injuries in this industry (NAICS 333318)
An employee was pushing metal sheets through a plate roller when the roller caught his gloves and his hands were pulled into the roller. The employee was hospitalized and required surgical amputation of two fingers on his left hand and surgery on two fingers on his right hand.
An employee was prepping a dip pot for cleanout. He was moving a utility cart into position. While moving the dip pot onto the cart, hot weatherstripping product spilled out of the pot and onto the employee's hand. The employee sustained burns to his left hand and wrist requiring hospitalization.
An employee was forming a part to put in the bin when her hand became caught in the die of the press. Two fingers were crushed. The employee sustained amputations of their right index and middle fingers at the joint closest to the fingertips.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.