Caught or wedged between objects nonrunning · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Motortow Wrecker Recovery & Transport, Inc, 2900 Honeycomb St, SHERWOOD, ARKANSAS 72120
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
On March 16, 2024, at approximately 8:00PM, an employee delivered a car to a private residence using a flatbed (rollback) wrecker. After removing the vehicle from the flatbed, the employee was winding the winch cable to secure the hook to the bed when his finger was caught between the hook and the bed, causing an amputation to the fingertip. The employee was hospitalized and required surgery.
HospitalizedAmputation Finger or thumb tip(s), nail(s) Tow truck
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
More severe injuries in this industry (NAICS 811198)
An employee was helping unload steel slit coils on a slitting line, using an overhead crane with a C-hook. The coil did not fit properly onto a turnstile. Another operator went to remove the coil from the C-hook using a forklift while the employee held the C-hook steady. The forklift contacted the coil, causing it to fall from the hook. It landed on the employee s foot, breaking four bones. The incident took place during a training activity.
An employee was trying to open the stuck tailgate of a truck. When he pulled on it, it gave way, causing him to fall back and hit his head on the pavement. He suffered a head laceration/contusion.
An employee was performing a repair and using a radial arm saw when they lacerated their index finger. The employee was hospitalized with an infection.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.