Federal OSHA recorded a severe workplace injury
at The Vollrath Company, 502 Highway 67, KIEL, WISCONSIN 53042
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
On March 21, 2024, an employee was trying to get the pushout on a mechanical press to reseat. After the employee twisted the pushout to reseat it, it actuated, pinching the employee's glove and left thumb and partially amputating the thumb tip.
Amputation Finger or thumb tip(s), nail(s) Stamping machinery, presses except printing
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
More severe injuries in this industry (NAICS 333318)
An employee was pushing metal sheets through a plate roller when the roller caught his gloves and his hands were pulled into the roller. The employee was hospitalized and required surgical amputation of two fingers on his left hand and surgery on two fingers on his right hand.
An employee was prepping a dip pot for cleanout. He was moving a utility cart into position. While moving the dip pot onto the cart, hot weatherstripping product spilled out of the pot and onto the employee's hand. The employee sustained burns to his left hand and wrist requiring hospitalization.
An employee was forming a part to put in the bin when her hand became caught in the die of the press. Two fingers were crushed. The employee sustained amputations of their right index and middle fingers at the joint closest to the fingertips.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.