Diamond Wash, LLC

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was changing the location of bolts that held a metal plate on the top of a car wash conveyor. His thumb became stuck between a part of the equipment and a roller on the conveyor. He sustained a fracture to the right thumb just above the base knuckle, resulting in an amputation.

An employee was walking on a carwash roller track when their right foot was caught inside the roller track equipment. The employee sustained torn ligaments and tendons, a partial degloving, and an arterial bleed in the foot.

On July 17, 2025, after someone reported a burning smell at the car wash exit near the washing machine, an employee was inspecting the area. When the employee touched the washing machine, he was electrocuted and hospitalized.

An employee came in early to use the air compressor to add air to one of his car's tires. While he was walking across the parking lot, the injured employee noticed a man sitting in the parking lot. The unidentified man rushed the injured employee and stabbed him three times in the back with a knife.

An employee was washing the tunnel equipment area using a sprayer and a chemical containing 5-10% hydrofluoric acid. The chemical seeped into his clothing and caused chemical burns to his abdomen and upper thighs. The employee was hospitalized.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.