NEWTON, MISSISSIPPI—
Biewer Sawmill-Newton, LLC
Exposure to electric arc · Electrical burns any degree
At a glance
Federal OSHA recorded a severe workplace injury at Biewer Sawmill-Newton, LLC, 331 Coliseum Drive, NEWTON, MISSISSIPPI 39345 on — Electrical burns any degree , affecting the Hand(s), finger(s) unspecified.
Watch Biewer Sawmill-Newton, LLC — free
Get an email when a new federal OSHA severe-injury report for Biewer Sawmill-Newton, LLC is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was evaluating a breaker that was overheating. The employee opened the panel door to remove the breaker and contacted a 440-volt line with pliers. The resulting arc flash burned the employee's right hand. The breaker was not locked out at the time.
More severe injuries at Biewer Sawmill-Newton, LLC
NEWTON, MISSISSIPPI—
Biewer Sawmill - Newton, LLC
An employee was trying to free a lumber slab that had hung up at a saw infeed. The chipper head and saw amputated one of his fingers at the knuckle.
NEWTON, MISSISSIPPI—
Biewer Sawmill-Newton, LLC
An employee had been operating the strapper machine to strap a bundle of lumber. The employee stepped inside the strapper to remove plastic material from the machine. Plastic strap wrapped around her right leg, pulling her into the bundle of wood and breaking her right tibia.
View Biewer Sawmill-Newton, LLC's full OSHA safety record →
Similar incidents · Same event type
HORSESHOE BAY, TEXAS—
Kasparian Underground LLC
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
LAKE PARK, FLORIDA—
Viking Utility Construction
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
SHREVEPORT, LOUISIANA—
Jean Simpson Personnel Services, Inc.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
LAVONIA, GEORGIA—
Grief Brothers Corporation
An employee was installing a fuse in a machine cabinet. An arc flash burned the employee's left arm, and the employee was hospitalized.
More severe injuries in this industry (NAICS 321113)
STATESBORO, GEORGIA—
Claude Howard Lumber Company
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
FREEPORT, TEXAS—
Shintech Inc
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
OPELIKA, ALABAMA—
West Fraser, Inc.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
REDWOOD, MISSISSIPPI—
SWS Sawmill, LLC
An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.
ATHOL, IDAHO—
IDAHO FOREST GROUP, LLC
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
More severe injuries in MISSISSIPPI
LAUREL, MISSISSIPPI—
Howard Industries Inc.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
VICKSBURG, MISSISSIPPI—
Hobby Lobby Stores, Inc.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
WEST POINT, MISSISSIPPI—
Owl's Head Alloys West Point
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
PASCAGOULA, MISSISSIPPI—
Ingalls Shipbuilding
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
COLUMBUS, MISSISSIPPI—
Heavy Equipment Movers and Installation, LLC
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.