Fall on same level resulting in exposure or contact · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at L. A. Darling Company LLC, 1401 Hwy 49B North, PARAGOULD, ARKANSAS 72450
on — Fractures , affecting the Multiple body parts n.e.c..
Final narrative
An employee was walking near a brake press. He tripped and fell, at which point the brake press (which was moving downward) pulled him in and trapped him against a machine. The employee sustained a fractured neck, collarbone, and shoulder blade, as well as 11 fractured ribs and pelvic fractures.
Hospitalized Multiple body parts n.e.c. Other constructed surface
A sanitation employee entered the chemical room and slipped on the wet floor. When he slipped, he kicked over a bucket containing cleaning chemicals. The chemicals splashed onto the employee's clothing and burned his skin.
An employee tripped while walking from one store register station to another. Her forehead struck a register, and she suffered fractures to two vertebrae in her neck. She was hospitalized.
An employee was using an electric pallet jack to retrieve a chemical tote from a staging lane. He inserted the pallet jack under the tote and began to back up. After moving backward for approximately 15 feet, the employee tripped on a collapsible tote. As he fell, the pallet jack ran over his left foot. His ankle was lacerated and his foot was fractured.
An employee had been unloading tires from the back of a pickup truck. The employee went to step down out of the back of the pickup truck and stepped on the lift gate in a vertical position. The lift gate tipped and employee fell, impacting their side on the upright liftgate. The employee sustained five fractured ribs and a punctured right lung. The employee was hospitalized.
On August 13, 2025, an employee was feeding wire through a junction box to feed a 120-volt circuit near a 480-volt bus duct. The bus duct suddenly combusted, and the employee suffered burns to his left hand and upper body. He was hospitalized.
An employee was operating a brake press and making the final bend on a steel part. Her right middle finger got caught between the part and the top punch as it bent the part upward. The employee sustained a crush injury resulting in amputation of the fingertip.
An employee was feeding scrap metal into a chipper when his right hand was squeezed against a metal component of the machine. He suffered an amputation to the right index finger at the second joint.
On June 18, 2025, an employee working as a millwork installer was cutting shims using a circular saw. The saw hit a knot in the wood and jumped, cutting the palm of the employee's left hand and causing partial amputations to three fingers. The employee was hospitalized.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.