Struck by running powered equipment during maintenance, cleaning, testing · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Pratt Industries Inc., 617 Little Britain Road, NEW WINDSOR, NEW YORK 12553
on — Fractures , affecting the Other finger(s) n.e.c..
Final narrative
An employee was troubleshooting a glue machine when their hand got pinched by the travel belt and non-driven guide wheel. The employee suffered a fractured left little finger and was hospitalized.
Hospitalized Other finger(s) n.e.c. Special process machinery unspecified
An employee was cleaning a press and removed a guard to clean between the rollers. The press turned on and the employee's right hand was pulled into the rollers and crushed up to the wrist. The main power on the press was not locked out at the time of the incident. The employee was hospitalized and his right little and ring fingers were medically amputated.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 322211)
On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.
An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.
An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.
An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.
An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.