Ferrellgas, Inc.

An employee was lighting the pilot light on a water heater. Gas ignited, causing a flash fire and explosion at the residential property. The employee suffered burns to the head, neck, upper torso, and upper extremities.

An employee tripped on a brick on the sidewalk in a parking lot. He fell to the ground, breaking his right hip. He was hospitalized.

An employee was rolling a propane cylinder when his left pinky finger was caught on the cylinder and fractured, requiring surgery and hospitalization.

An employee was lifting propane bottles and suffered a pinched nerve in his back. The employee was hospitalized.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was connecting a hose to fill a propane cylinder. The flow of propane was activated when the filler nozzle was partially connected to the cylinder. The nozzle detached from the cylinder valve, causing expanding liquid propane to release through the nozzle. This caused the employee to lose his balance, spin, become entangled in the hose, and fall. He struck his head on the ground and suffered fractures to the temple and cheekbones, a laceration on the forehead, and a brain bleed. The employee was hospitalized.

An employee was filling a motor fuel cylinder from a bobtail. When he opened the handle on the fill nozzle it popped off the filler valve and pushed him back into a rack where he struck his head on a cylinder cage. He sustained a laceration to the back left side of his head. While working to wrestle the hose to the ground, he sustained burns from liquid propane on the right side of his chest and right arm, and sustained minor burns on the left side.

An employee had been refueling empty propane tanks at a site. He drove back to the bulk plant facility and began to feel ill. The employee sustained dehydration due to heat.

An employee was pumping liquid propane from a propane delivery truck to a storage tank. After the transfer was completed, the employee closed the valves and disconnected the transfer hose. During the transfer, the liquid propane auto-refrigerated the riser pipe of the storage tank and that delayed the vaporization of the propane. Upon reaching a higher temperature, liquified propane began rapidly expanding. Liquid propane then discharged from the pipe and contacted the employee, causing cold burns. The employee was hospitalized for second-degree burns to their torso and arms.

An employee was delivering propane to a customer when he heard a pop in his lower back. The employee was hospitalized with a back injury.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.