105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

ABM Industry Groups LLC

Struck by running powered equipment irregular movement, kick back · Amputations, avulsions, enucleations unspecified

Federal OSHA recorded a severe workplace injury at ABM Industry Groups LLC, 1455 State Hwy 16, BROOKS, CALIFORNIA 95606 on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..

An employee was cutting wood with a table saw when the stock material bound up on the saw blade and their left hand made contact with the saw blade. They sustained partial amputations of their index and ring fingers.

Amputation Other finger(s) n.e.c. Stationary saws table

ABM Industry Groups, LLC

On April 24, 2023, an employee was walking toward the drainage basin area to empty a bucket of dirty water when she tripped over a 2-3-inch transition barrier that is between the warehouse and the drainage basin. The employee fell to the ground and sustained a right leg fracture that required hospitalization.

ABM Industry Groups, LLC

An employee fell while changing paper towels in a bathroom. She suffered a broken hip.

ABM Industry Groups, LLC

An employee was on break in the custodial office when they were bit by an ant, resulting in a hospitalization for infection.

ABM Industry Groups, LLC

An employee was conducting maintenance on a sugar tank and fell into the tank. He became stuck and lost consciousness.

View ABM Industry Groups LLC's full OSHA safety record →

Champion Replacement Windows of Kansas City

An employee was cutting a board using a circular saw. The saw pinched, kicked back, and cut the employee's left ring and little fingers. The employee suffered an amputation to the little finger.

Jamestown Metal Marine Sales, Inc.

An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.

Oschner Clinic Foundation

An employee was using a table saw to cut wedges for a deck when the wood jumped and his right palm was lacerated by the blade.

Menard, Inc.

An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.

FC Drywall

An employee was cutting wood with a circular saw. The machine lagged and cut the employee's finger. The employee required surgical amputation of the finger at the hospital.

Professional Sanitation Cleaning Services, Inc.

An employee was rinsing a food processing machine at a facility and went to stabilize himself. His left hand contacted the surface of the machine and a guard inadvertently closed, crushing the tip of his ring finger and resulting in an amputation and fracture.

Allan Industries, Inc.

An employee was performing janitorial duties on the 15th floor of a building that was under construction. She began having trouble breathing. The employee was hospitalized with lung irritation caused by dust.

HPC INDUSTRIAL SERVICES LLC

On October 17, 2025, an employee was descending a fixed two-step stool when she slipped, landed on her left leg, and suffered a broken femur. She was hospitalized, requiring surgery.

HPC INDUSTRIAL SERVICES LLC

An employee slipped while getting on a trailer. His chin struck the trailer jack, and he suffered fractures to his jawbone and thyroid cartilage. He was hospitalized, requiring surgery.

Robinson Premier Cleaning Services, Inc.

A crew was finishing work for the day at a job site. An insulated modular panel (IMP) being used as a door fell on an employee. She suffered a dislocated shoulder, a broken arm, and a gash on her left leg. She was hospitalized, requiring surgery for the arm/shoulder injury.

Department of Justice - USMS

The injured employee was assisting a Department of Homeland Security (DHS) enforcement operation. During an apprehension, officers returned fire at a subject and struck the employee with a bullet. The employee sustained a gunshot wound to their right hand.

M1 Support Services

The injured employee was assisting in the disassembly phase after a radar array had been lowered and secured. The crew began removing load bearing pins from an overhead crane to free the radome. A load bearing pin was stuck. The injured employee went to remove the pin manually as a second team member applied pressure from the opposite side. The pin unexpectedly released and struck the injured employee s right thumb, resulting in partial amputation of the distal phalanx including an open distal phalanx fracture and nail bed laceration.

Dept. of Defense - USN

An employee was working on an electrical panel in a mechanical room when an arc flash occurred. The employee suffered burns.

Dept. of Homeland Security - CBP

At about 3:10 p.m. on October 3, 2025, an employee was inspecting a car. Two dogs that had been in another car were leashed and tethered to a bollard. As the employee inspected the first car along with a narcotics detection dog, one of the other dogs came loose and attacked the narcotics dog. The employee was separating the dogs when the other dog bit his left ring finger. The last joint of the finger was injured and part of it was bitten off.

Sycuan Casino Resort

An employee was preparing a bundle of green onions for chopping. While holding the bundle in his left hand, he made his first cut using a 9-inch kitchen knife held in his right hand. The knife contacted the tip of his left thumb, resulting in an amputation of approximately 0.5 inches of the thumb that required hospitalization.