Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at WB Manufacturing, LLC, 507 East Grant Street, THORP, WISCONSIN 54771
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
On May 8, 2024, at approximately 10:50 PM, an employee was using a compressed air gun to clean the single-sided edge banding machine and unjam it when the blade amputated her left middle fingertip.
HospitalizedAmputation Finger or thumb tip(s), nail(s) Banding, baling, strapping machinery
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 337127)
On March 19, 2025, at 1:35 p.m., two employees were loading a tractor trailer that was backed into a dock and connected to the dock lift. The driver began to drive away while the employees were still on the dock lift, which then collapsed. The injured employee fell to the ground, resulting in a right hip contusion that required hospitalization.
An employee was emptying scrap from a hopper into a metal dumpster. The employee released the hopper latch and his left index finger was caught between the fork and the hopper frame. The employee sustained a fingertip amputation.
An employee was loading a truck with product, reached to open the shipping door but grabbed a loading bar instead, causing him to fall out of the door. The employee fell approximately 4 feet to the ground and sustained a fracture to the lower right leg.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.