McKee Foods Corporation

An employee had just finished unloading material from a truck. He was descending using the truck's built-in ladder when he missed the last rung, fell to the ground, and broke his hip and left wrist.

An employee was cleaning a butterfly valve on top of a sugar mixer when his right hand was crushed by the valve. The employee sustained fractures, tendon damage, and stitches to the palm on the right hand. The valve was not locked out/tagged out at the time.

An employee was adding cases of product onto a conveyor from a wooden float board (a flat laminated board approximately 4 feet by 4 feet) that was on top of a half pallet on the floor. The employee was removing an empty float board from the half pallet when they tripped on the half pallet and fell against the conveyor. Their head struck a mounting bracket (about 3 inches off the floor) that mounts a piece of equipment associated with the conveyor to the floor. The employee sustained an intracerebral hemorrhage, a laceration to the forehead requiring 17 stitches, a fractured nose, and multiple neck fractures.

An employee was taking a break after helping to unload materials when they passed out, resulting in hospitalization.

An employee was about to spray lubricant onto the chain and sprockets of a conveyor belt. He fell forward and his right index finger was caught in the moving chain and sprockets. The finger was amputated at the first knuckle.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee (who had recently walked through water accumulated on the floor) slipped and fell to the floor. The employee suffered a broken right wrist and right elbow and was hospitalized, requiring surgery.

An employee was performing maintenance on a production line, requiring a testing and positioning phase for the whipped cream dispensers. The employee was positioning the dispensers using wrenches when one of the sensors was triggered by the pie pans coming down the line. The depositor heads lowered and pinched the employee's left ring finger, resulting in an amputated fingertip. The whipped cream dispensers were not guarded at the time and the line was not locked out/tagged out.

During a line changeover, an employee was rinsing a depositor with water. The employee was working to remove a piece of chocolate, stuck in the machine's roller, when the roller's moving parts caught his middle finger. He suffered an amputation to the fingertip with bone loss.

An employee was emptying a trash can into a dumpster. He tripped while turning around, fell over a rail onto the concrete floor, and broke bones in his back and wrist.

During a changeover, an employee was wiping down the dough chunker machine and the chunker closed on his left hand. The employee sustained crushing/laceration injuries, requiring hospitalization and surgery.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.