ROME, GEORGIA—
Georgia-Pacific Wood Products LLC
Other fall to lower level unspecified · Sprains, strains, minor tears
At a glance
Federal OSHA recorded a severe workplace injury at Georgia-Pacific Wood Products LLC, 380 Mays Bridge Rd SW, ROME, GEORGIA 30165 on — Sprains, strains, minor tears, affecting the Leg(s) unspecified.
Final narrative
On June 17, 2024, at approximately 5:55 a.m., a machine operator injured his right leg after stepping into a 6-inch gap between sections of the edger infeed platform grating. The employee sustained a muscle tear and hematoma.
More severe injuries at Georgia-Pacific Wood Products LLC
CORRIGAN, TEXAS—
Georgia Pacific Wood Products LLC
An employee was cleaning an air station with a pressure washer when the water stream went through their boot and contacted their left foot, resulting in a 1.5 inch by 1 inch laceration to the top of the foot.
TAYLORSVILLE, MISSISSIPPI—
Georgia Pacific Wood Products, LLC
An employee was operating a forklift in reverse carrying five bundles of plywood. Upon applying the brakes, the top load shifted backward onto the top of the forklift cage and pinched the employee's the left middle fingertip against the forklift cage, resulting in a partial fingertip amputation.
PINELAND, TEXAS—
Georgia-Pacific Wood Products LLC
An employee was testing whether electricity was available at a valve on a piece of equipment that moved from side as it cut logs. After testing, he inserted an electric plug back into the valve. This caused the equipment to move to the side and then return to its home position. The employee was caught between a motor and a hydraulic tank and suffered an injury to the left shoulder and upper torso, resulting in three broken ribs.
BELK, ALABAMA—
Georgia-Pacific Wood Products LLC
An employee was helping repair a sawmill trimmer. The employee transferred a pry bar from their right hand to their left hand, then turned, at which point the employee's left middle fingertip was pinched between the pry bar and a saw box. The fingertip was crushed at the nailbed, but not fractured; the employee was hospitalized and required surgery.
CORRIGAN, TEXAS—
Georgia Pacific Wood Products LLC
A maintenance employee sustained a crush injury to their left little finger while performing maintenance on a block saw. The fingertip was later surgically amputated.
View Georgia-Pacific Wood Products LLC's full OSHA safety record →
Similar incidents · Same event type
JACKSONVILLE, FLORIDA—
Hobby Lobby Stores, Inc.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
EAST HAMPTON, NEW YORK—
Garden Angels New York LLC
An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.
COLUMBUS, OHIO—
Foundation Steel, LLC
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
BROOKLYN, NEW YORK—
NYU Langone Hospital-Brooklyn
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
More severe injuries in this industry (NAICS 321113)
STATESBORO, GEORGIA—
Claude Howard Lumber Company
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
FREEPORT, TEXAS—
Shintech Inc
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
OPELIKA, ALABAMA—
West Fraser, Inc.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
REDWOOD, MISSISSIPPI—
SWS Sawmill, LLC
An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.
ATHOL, IDAHO—
IDAHO FOREST GROUP, LLC
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
More severe injuries in GEORGIA
PEACHTREE CITY, GEORGIA—
GS II Building Products, Inc.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
AUGUSTA, GEORGIA—
US Battery Manufacturing Company, Inc
A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.
CARTERSVILLE, GEORGIA—
Alfa Insurance
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
ATLANTA, GEORGIA—
EMORY UNIVERSITY HOSPITAL
An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.
TRENTON, GEORGIA—
Bull Moose Tube
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.