Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Leprino Foods Company, 400 Leprino Avenue, WAVERLY, NEW YORK 14892
on — Amputations, avulsions, enucleations unspecified, affecting the Hand(s) and finger(s).
Final narrative
An employee was cleaning the ribbon cutter machine when their hands contacted the rotating blades. The employee sustained a partial amputation of their right hand and a partial amputation of their left ring finger.
HospitalizedAmputation Hand(s) and finger(s) Dairy and milk processing machinery
The injured employee was assisting another employee with preparations for welding a pipe. A clamp released and the injured employee was sprayed by hot water resulting in burns to the right side of their body. The employee was hospitalized.
An employee was performing maintenance on a chain pulley system and replacing a metal belt chain. He manually applied the chain onto a sprocket. While pulling the chain to connect it to the other end, tension on the chain was lost, causing the employee's thumb to slip and contact the metal sprocket catch. The employee's thumb tip was amputated.
An employee was rinsing cheese conveyor belts when he saw a piece of cheese on a weigh belt and attempted to remove it. His arm was then caught in the weigh belt, resulting in a broken forearm. The weigh belt was guarded at the time of the incident.
An employee was using a diluted corrosive chemical solution with a 24" long brush to clean drains. The employee sustained a second degree chemical burn to the forearm and wrist when the chemical solution splashed under the employee's protective gloves and sleeves.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 311513)
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was changing an O-ring on a pneumatic valve. The employee had placed the valve on his work cart and was applying air to open the valve and access the O-ring. After changing the O-ring, the valve closed on his fingertip, crushing it. He was taken to the hospital, where he received an amputation.
An employee was using a pike to move a pallet of sugar that was stuck in the powder racking. The employee fell backward, landing on his right leg. The employee's leg was fractured and he was hospitalized.
The injured employee was carrying totes of cheese when they tripped over another employee's foot/ankle and fell to the cement floor. The injured employee sustained six fractured ribs on the left side and was hospitalized.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.