Estes Express Lines

An employee was inside a trailer, loading freight, when their leg was caught in shrink wrap. The employee fell, resulting in a fracture to their right thigh bone, which required surgery.

On August 20, 2025, an employee was moving a dolly when they felt a pop in their back. The employee was hospitalized.

On July 11, 2025, a forklift operator was making a U-turn when he was thrown from the forklift and his head struck the pavement. The employee sustained a concussion and was hospitalized.

An employee was walking down the stairs when they slipped and fell on the stairs. They were hospitalized with a fracture to their upper right leg.

An employee was inspecting Estes Express equipment on the premises and was struck by a tractor trailer. The employee suffered a broken femur and was hospitalized, requiring surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

An employee was hooking up a set of 28-foot trailers, attaching a converter dolly to the lead trailer's pintle hook. He backed up the lead trailer and parked it a foot from the converter dolly, then lifted the converter dolly and rolled it to the lead trailer to set it onto the hook. The converter dolly kicked up, and the employee's left hand was caught between it and the trailer. He suffered a severe laceration to the palm between the ring finger and middle finger.

An employee was cleaning the windshield of his truck. When he stepped down from the truck, he lost balance and reached to catch himself using the side mirror. The impact fractured his left wrist. The employee was hospitalized and required surgery.

An employee was standing on the DOT bumper on the back of a standard 53-foot trailer. The employee lost his footing and his grip on the handle bar, and fell approximately 42 inches to the ground. The employee was hospitalized with a fractured left hip/femur.

A driver was making a delivery. As he was climbing onto his trailer to get boxes, the strap he was using to pull himself up broke. He fell from the back of the trailer to the ground, landing on his right leg and breaking his femur.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.