WALDO, ARKANSAS—
US Metal Works, Inc.
Struck by other falling object n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at US Metal Works, Inc., Columbia Road, 141, WALDO, ARKANSAS 71770 on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
On July 20, 2024, a drag chain conveyor was being dismantled. The take-up section of the conveyor was being lifted when a piece of the pan fell from a height of about 8 feet, hit the ground, and rolled onto an employee's right foot. He suffered abrasions to his right lower leg and a broken right foot. He was hospitalized.
Similar incidents · Same event type
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
ATHENS, TEXAS—
Red Dot Corporation
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
RAPID CITY, SOUTH DAKOTA—
Simon Contractors of South Dakota, Inc.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
SOUTH BOSTON, MASSACHUSETTS—
RJV Construction
An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.
More severe injuries in this industry (NAICS 332999)
ALLENTOWN, PENNSYLVANIA—
Stanley Black & Decker, Inc.
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
INGLESIDE, TEXAS—
Jamestown Metal Marine Sales, Inc.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
AUSTIN, TEXAS—
Architectural Metal Solutions, Inc.
An employee was installing a door from an A-frame ladder. He fell from the ladder, landed on his feet about 8 feet below, and suffered a broken tibia.
FALL RIVER, MASSACHUSETTS—
Spectrum Lighting, Inc.
An employee was leaving the building at the end of the day when she missed a step and fell, fracturing her right foot.
TOMBALL, TEXAS—
Metal Zinc, LLC
Two employees were running a CNC folder machine. The injured employee went to adjust the metal and the machine came down, crushing her forearms. Her left arm was fractured and both arms required stitches.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.