A. Duie Pyle, Inc.

An employee was unloading freight using an electric pallet jack. While backing up the pallet jack collided with a rack. The employee's arm and wrist were caught between the pallet jack handle and the metal rack, resulting in injuries.

An employee was conducting a pre-trip inspection on his truck when he slipped on ice and tore his left quadriceps muscle.

On February 28, 2019, an employee slipped on black ice in a trailer yard, falling to the ground and suffering multiple fractures of the right foot.

An employee was pumping water into a trailer piping system when his finger contacted the plunger, amputating his fingertip.

An employee was unloading freight from a truck when the load fell on and broke his ankle.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

Two employees were removing a service lift platform from the back of a radar system. While handling the service lift platform, employee 2 was standing on the back of the radar and lost their footing, causing the service lift platform to shift and fall. The injured employee then fell from the top of the platform electronic subsystem (PES) to the floor, approximately 56 inches. The injured employee fractured his left elbow and left hip.

An employee fell from a loading dock to the ground 2-3 feet below. She suffered a compound fracture of the left hip and was hospitalized, requiring surgery.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

An employee was hooking up a set of 28-foot trailers, attaching a converter dolly to the lead trailer's pintle hook. He backed up the lead trailer and parked it a foot from the converter dolly, then lifted the converter dolly and rolled it to the lead trailer to set it onto the hook. The converter dolly kicked up, and the employee's left hand was caught between it and the trailer. He suffered a severe laceration to the palm between the ring finger and middle finger.

An employee was cleaning the windshield of his truck. When he stepped down from the truck, he lost balance and reached to catch himself using the side mirror. The impact fractured his left wrist. The employee was hospitalized and required surgery.

An employee was standing on the DOT bumper on the back of a standard 53-foot trailer. The employee lost his footing and his grip on the handle bar, and fell approximately 42 inches to the ground. The employee was hospitalized with a fractured left hip/femur.

A driver was making a delivery. As he was climbing onto his trailer to get boxes, the strap he was using to pull himself up broke. He fell from the back of the trailer to the ground, landing on his right leg and breaking his femur.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.