Frito-Lay, Inc.

An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.

An employee was working to clear a jammed box in a box drop area. The employee's left thumb was caught and amputated between a box drop tray and a support bar.

An employee slowed his forklift in a warehouse aisle as another forklift turned from an intersecting aisle. The employee's left arm was pinned between the two forklifts. The employee developed compartment syndrome.

An employee adjusted a pallet on racking and was walking back to their parked stand-up forklift when they were struck by another stand-up forklift. The employee fell into the racking system and sustained a fractured pelvis and ribs.

An employee was walking while doing product inventory. The employee slipped and fell on metal decking and sustained a laceration to their left shin and calf area. The employee required hospitalization and surgery.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

While attending the slab line, an employee observed that dough was accumulating on the plastic blades. He proceeded to clean the blades. His left index finger came into contact with an adjacent blade that moves laterally (left to right), resulting in a partial amputation.

A sanitation employee entered the chemical room and slipped on the wet floor. When he slipped, he kicked over a bucket containing cleaning chemicals. The chemicals splashed onto the employee's clothing and burned his skin.

An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.

An employee had just finished unloading material from a truck. He was descending using the truck's built-in ladder when he missed the last rung, fell to the ground, and broke his hip and left wrist.

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.