Struck by running powered equipment irregular movement, kick back · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at KEYSTONE CONCRETE PLACEMENT, 1277 Hill High School II, LIBERTY HILL, TEXAS 78642
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
On August 28, 2024, an employee utilized a sawhorse and a circular saw to cut a 2 x 4. The saw struck a knot in the board and kicked back, amputating the tip of the employee's thumb.
Amputation Finger or thumb tip(s), nail(s) Saws except chainsaws
More severe injuries at KEYSTONE CONCRETE PLACEMENT
An employee was using a hand grinder to eliminate discrepancies on columns around the project when the grinder jumped and came out of the employee's hands. They sustained a little finger amputation.
An employee was cutting a hole in a plywood wall using a rotary saw when the employee sustained a laceration to the leg that resulted in hospitalization.
An employee was using a 16-pound sledgehammer to set formwork for concrete along the side of the street when the hammer struck his right index finger, resulting in a fingertip amputation.
The injured employee was part of a wrecking crew removing plywood formwork from a structural concrete deck. He was using a pry bar to loosen the formwork. As he was pushing the pry bar upward, the formwork separated from the concrete and the pry bar slipped upward, smashing his left index finger between the bar and a metal support pole and causing amputation of the proximal joint.
An employee was cutting a board using a circular saw. The saw pinched, kicked back, and cut the employee's left ring and little fingers. The employee suffered an amputation to the little finger.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.
An employee was cutting wood with a circular saw. The machine lagged and cut the employee's finger. The employee required surgical amputation of the finger at the hospital.
More severe injuries in this industry (NAICS 238110)
An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.
An employee was changing a boom pipe delivery system on a concrete pump truck. He tripped and fell from an elevated level to the ground, resulting in multiple leg fractures.
An employee was reading numbers off a belt that feeds a plant. He reached his hand up and the belt caught his finger, resulting in a finger amputation.
An employee was guiding the pouring end of a concrete pump truck's boom while standing on top of 4-foot wall forms. The boom contacted power lines and the employee was shocked. The employee sustained third-degree burns on the entry and exit path of the electricity, and also sustained first- and second-degree burns to their torso and legs.
An employee was holding a form board on a section of pavement. A skid steer backed into the employee's ankle, breaking it. The employee was hospitalized.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.