BRISTOW, OKLAHOMA—
Capital Electric Line Builders
Struck by other falling object n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Capital Electric Line Builders, Bristow to Gypsy, BRISTOW, OKLAHOMA 74010 on — Fractures , affecting the Foot (feet) excluding toes.
Final narrative
An employee had just finished framing an H-structure. They lowered one side of the horizontal structure down on cribbing to keep it raised off the floor. They removed the pull stand on that side to use it at a different location. The pull stand on the other side of the structure broke, allowing the H-structure to fall down 3 to 4 feet onto the employee s left foot. The employee sustained a fractured talus and required surgery.
More severe injuries at Capital Electric Line Builders
PARKVILLE, MISSOURI—
Capital Electric Line Builders
An employee was removing rigging used to attach a de-energized conductor to a steel transmission pole when he suffered electrical burns and blisters to both hands.
PARKVILLE, MISSOURI—
Capital Electric Line Builders
A distribution pole broke while a lineman was repositioning on the pole. The employee struck the cut-out bracket when they fell. The employee was hospitalized with a skull fracture, broken teeth, and lacerations to the back of the head and the chin.
RIVERSIDE, MISSOURI—
Capital Electric Line Builders
An employee was helping others to pull a pole from a stack and load it onto a digger derrick when the pole fell and struck the employee, fracturing his pelvis and puncturing his bladder.
WICHITA, KANSAS—
Capital Electric Line Builders
A lineman in a bucket truck was removing a dead insulator. Something hanging down from the basket contacted a live line below. The employee suffered electrical burns to the hands and thighs.
View Capital Electric Line Builders's full OSHA safety record →
Similar incidents · Same event type
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
ATHENS, TEXAS—
Red Dot Corporation
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
RAPID CITY, SOUTH DAKOTA—
Simon Contractors of South Dakota, Inc.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
SOUTH BOSTON, MASSACHUSETTS—
RJV Construction
An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.
More severe injuries in this industry (NAICS 238210)
WASHINGTON, DISTRICT OF COLUMBIA—
Smart Building Technologies - A Fidelity Company
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
CANTON, OHIO—
Abbott Electric Inc
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
AVENTURA, FLORIDA—
Mintcrest Corp
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
KUNA, IDAHO—
Cupertino Electric, Inc.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
AURORA, ILLINOIS—
Swedberg Electric, LLC
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.