Struck by running powered equipment during maintenance, cleaning, testing · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Adams Land Company, 490 N Main St, LEACHVILLE, ARKANSAS 72438
on — Amputations involving bone loss, affecting the Elbow(s).
Final narrative
An employee was unclogging cotton from a gin stand using a 2-foot stick when their left arm was caught and crushed in the blades of the gin stand. The employee sustained a crushing injury of their left arm to the elbow, resulting in a surgical amputation a few days later.
At about 7:44 p.m., a group of employees were looking for the cause of a smoke-like smell. They traced the scent to the top of a seed house, where they found black areas in the cotton and on the wall around a bale motor. When the motor was turned off, the fire flashed. Two of the employees suffered severe hand, face, ear, and neck burns.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 115111)
An employee stood on a conveyor wall to unclog the cotton feeder. The employee fell on the moving conveyor and fractured his right arm. The employee was hospitalized.
Multiple employees were using baling buckets to remove 750 gallons of 150-degree hydraulic oil out of a pit in a confined space for approximately 5.5 hours. The injured employee was standing on a ladder performing this task when they fell feet-first into the hydraulic oil pit, resulting in burns on both legs.
An employee was removing cotton build-up from a roller gin when their hand was pulled into the rollers. The employee sustained soft tissue damage to their right hand and forearm.
An employee was using an electric module tarp roller to roll up used module tarps for storage. The employee's thumb became caught in the module tarp roller and his arm was pulled into the roller bar. The employee sustained a fractured left wrist.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.