FleetPride, Inc.

An employee was installing a driveshaft on a customer's vehicle. He was using a floor jack to hold the driveshaft in place to line up the bolts. The driveshaft moved off the jack and crushed his left ring fingertip, resulting in an open fracture of the tuft of the distal phalanx, as well as a partial amputation.

On May 30, 2025, an employee was replacing the fuel filter on a yard spotter truck when the cab of the yard spotter came down on him. The employee sustained a fractured femur.

An employee was working outside in the heat and installing flooring in a trailer. He became ill and then experienced dizziness. The employee sustained a kidney injury due to dehydration.

The injured employee was on a ladder inside a trailer assisting another employee with riveting a panel. The ladder kicked out from under him and he fell on top of the ladder sustaining a fractured rib and foot.

An employee was trying to replace a bent pallet racking beam. He was standing on a ladder while another employee used a forklift to push against the beam. The beam popped out, causing the employee to fall 3 feet to the concrete floor and suffer a crushed vertebra in the lower back.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee was descending a ladder when their foot caught on the edge of the bottom step. The employee fell and struck the floor, landing on their left hip and suffering a hip fracture that required hospitalization and surgery.

An employee had loaded parts into his van and was pulling an empty utility cart back into the store. The wheels of the cart got caught in the doorway. When the employee pulled it through, the cart fell over onto him and he fell to the floor, landing on his right hip. The employee's hip was fractured.

An employee was found on the floor within the enclosure of a laser machine. The employee was adjusting a sheet of metal on the machine while carrying a remote control, which actuated the machine, moving the carriage and causing the employee to be caught between the carriage and the machine table. The employee was hospitalized with a broken right shoulder and left ankle, and lacerations on their legs and ankles.

An employee was wrapping pallets using a plastic wrap dispenser when he felt a pop in his back along with a burning and stabbing sensation. The employee sustained the herniation of discs L4 and L5.

An employee was working at the end of a ramp when a powered industrial truck rolled down the ramp and broke the employee's foot.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.