105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Smith-Blair, Inc.

Struck by running powered equipment during maintenance, cleaning, testing · Amputations involving bone loss

Federal OSHA recorded a severe workplace injury at Smith-Blair, Inc., 30 Globe Avenue, TEXARKANA, ARKANSAS 71854 on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).

An employee was setting up a lathe when it started running. The employee sustained an amputation of their right index fingertip at the first knuckle.

Amputation Finger or thumb tip(s), nail(s) Lathes

Smith-Blair, Inc.

An employee was operating a shear to cut stainless steel and amputated their left ring, middle, and index fingertips.

Smith-Blair, Inc.

An employee was attempting to reposition a pipe that was being cut on a semi-automatic pipe band saw. His left hand was on the pipe when the hydraulic pipe clamp was activated. His left middle fingertip was then caught between the clamp palate and the pipe's side wall, requiring surgical amputation.

SMITH-BLAIR,INC

An employee was walking when he was struck by rubber gaskets that fell from a height of approximately 10 feet. He was hospitalized with a fractured right ankle.

View Smith-Blair, Inc.'s full OSHA safety record →

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

CFL USA, LLC

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

North American Filtration

An employee was pushing metal sheets through a plate roller when the roller caught his gloves and his hands were pulled into the roller. The employee was hospitalized and required surgical amputation of two fingers on his left hand and surgery on two fingers on his right hand.

DRT Manufacturing Co.

An employee was prepping a dip pot for cleanout. He was moving a utility cart into position. While moving the dip pot onto the cart, hot weatherstripping product spilled out of the pot and onto the employee's hand. The employee sustained burns to his left hand and wrist requiring hospitalization.

Klapperich Tool Inc

An employee was operating a bandsaw to cut a metal tub when the saw blade amputated his left little fingertip.

TNT Industries Inc

An employee was forming a part to put in the bin when her hand became caught in the die of the press. Two fingers were crushed. The employee sustained amputations of their right index and middle fingers at the joint closest to the fingertips.

JV Manufacturing, Inc.

An employee was cleaning up a paint gun when they drank paint thinner from a water bottle. The employee was hospitalized.

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

The Goodyear Tire & Rubber Company

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

Big River Steel, LLC

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

American Tile & Marble Co., Inc

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

Johnson Industrial Coatings, LLC.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.