DALLAS, TEXAS—
Bosworth Steel Erectors, Inc
Other fall to lower level 6 to 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Bosworth Steel Erectors, Inc, 4001 Jaffe St, DALLAS, TEXAS 75216 on — Fractures , affecting the Lower leg(s).
Final narrative
An employee was exiting the cab of a crane and getting onto an 8-foot A-frame ladder. He stepped down onto the ladder s second step from the top and his foot slipped due to condensation buildup from the morning temperature change. As he fell, his left boot got caught between the top two steps of the ladder, resulting in a compound fracture to his lower left leg. He then fell 8 feet to the ground below, landing face down, and sustaining an abrasion to his chin.
More severe injuries at Bosworth Steel Erectors, Inc
HOUSTON, TEXAS—
Bosworth Steel Erectors, Inc.
Employees were landing a bundle of decking. The bundle spun around and caught an employee against a column. The employee suffered a liver laceration.
WESTLAKE, TEXAS—
Bosworth Steel Erectors, Inc.
Ironworkers were connecting structural steel framing members at roof level. A scissor lift platform was extended approximately 25 feet above the concrete slab when the tagline rope on the end of the beam snagged on the handrail of the scissor lift.
The top of the scissor lift was pulled over to the north.
When the lift's center of gravity moved outside of the wheels, the scissor lift fell over. An employee was on the platform when the scissor lift fell over. He was tied off to the anchor point in the scissor lift and hit the concrete slab on level 4, suffering broken bones and internal damage.
PFLUGERVILLE, TEXAS—
Bosworth Steel Erectors, Inc.
An employee was welding when hot slag dropped into his tool bag, igniting it and causing burns on his back and side.
NORMAN, OKLAHOMA—
Bosworth Steel Erectors, Inc
An employee in an aerial lift was pulling on a come-along to align a piece of steel. The chain broke and struck the employee's leg, knocking him to the floor of the lift. He suffered a broken tibia and fibula.
MCKINNEY, TEXAS—
BOSWORTH STEEL ERECTORS, INC.
Employee was hospitalized after burning his legs while welding structural steel. Hot slag caught the acetylene tank on fire.
View Bosworth Steel Erectors, Inc's full OSHA safety record →
Similar incidents · Same event type
SYRACUSE, NEW YORK—
Cashless Tolling Constructors
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
JAMAICA, NEW YORK—
Cornell & Company, Inc.
An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.
CRESTVIEW, FLORIDA—
Anderson Columbia Co., Inc.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
ATLANTA, GEORGIA—
Freeman Expositions, LLC
An employee was working on a platform, raised 6 to 8 feet in the air, to get something off a rack. The employee fell from the platform to the ground and sustained a head injury and injury to multiple body parts.
CANAL WINCHESTER, OHIO—
Faler Feed Store, Inc.
An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.
More severe injuries in this industry (NAICS 238120)
COLUMBUS, OHIO—
Foundation Steel, LLC
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
ATHENS, TEXAS—
Red Dot Corporation
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
JAMAICA, NEW YORK—
Cornell & Company, Inc.
An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.
AUSTIN, TEXAS—
K Constructor, LLC
An employee was unloading a rebar delivery from a flatbed, 19-wheel trailer. The employee rigged the load with wire rope chokers. The load was picked up 3-4 feet above the trailer deck by a crane. The load began to swing and the employee grabbed onto it to prevent it from being pushed off the trailer deck. The crane continued to lift the load, and the employee let go so the crane did not lift him to the third story. The employee fell approximately 12 feet to the ground below, resulting in a back injury and fractured vertebrae.
KINGS MOUNTAIN, NORTH CAROLINA—
Bowman Steel, LLC
An employee was attaching a steel angle plate weighing (approximately 200 pounds) to the end of a structural member (5,000 pounds) and was supported by dunnage. The dunnage was a crane mat (11 inches tall) with a 4x6 board on top of it and it supported five identical members. The main piece was 30.75 feet long, 37.25 feet tall, and 1 food wide. As the employee slid the piece of metal on top of the member to begin attaching it, the entire member began to tip over. The employee went to stop the main piece from tipping over and it landed on his ankle, fracturing it.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.