Federal OSHA recorded a severe workplace injury
at Precision Custom Components, LLC, 500 Lincoln Street, YORK, PENNSYLVANIA 17401
on — Thermal burns degree unspecified, affecting the Upper and lower extremities n.e.c..
Final narrative
An employee was cleaning pans containing adhesive by pouring acetone into the pans. After soaking, the employee used a plastic spatula to scrape the paint from the pan. During scraping, a fire spontaneously started underneath the employee near the pan. The employee threw the container of acetone out of the way to avoid it catching on fire, and spilled acetone onto his clothing, causing the fire to spread. The employee suffered burns to both hands and the right calf.
Hospitalized Upper and lower extremities n.e.c. Acetone
More severe injuries at Precision Custom Components, LLC
An employee was working on a large milling machine, about 12 feet high. The product adjustment cable was hooked to the platform; when the machine moved, the platform failed and developed a 45-degree slant. The employee fell through the guardrail and landed first on a machine table about 9 feet below, then on a machine cover a foot below that. The employee suffered a broken pelvis, hip, and left forearm; broken ribs; and internal bleeding from the spleen.
An employee was using a torch to loosen a bolt on a water trailer. Natural gas was present in the water and it ignited, causing a fire. The employee sustained third-degree burns to their upper leg.
An employee had been removing phosphorus pentasulfide while on a scaffold. He was using a non-sparking tool to dislodge the phosphoric material. The employee noticed a flash of flame. He descended the scaffold, but the flash ignited residual phosphorus pentasulfide that was on the outside of the employee's personal protective equipment (PPE). He sustained thermal burns to his right hand and right calf.
An employee was taking a butane gas sample as part of the hydrocarbon refining process. A component disconnected and the butane ignited, resulting in first- and second-degree burns to the employee's forearms and to their face, including their cheeks, chin, and neck.
An employee was troubleshooting a power washer in the field. Because there might have been water in its fuel, he brought it back to the shop and drained about a gallon of fuel from the tank into a plastic container. Some of the fuel spilled onto the floor and ignited. The employee was stomping out the fire when he lost his balance and tripped into a stool, which caused the plastic container to spill more fuel onto the fire. The employee's pants and shirt caught on fire, and he fell, abrading his knee while trying to get through the flames. As well as the knee abrasion, he suffered burns to the left leg and left lower quadrant of the torso. He was hospitalized.
An employee was fueling a gasoline-powered pressure washer with a safety fuel can. During the transfer the fuel ignited, causing a fire. The employee sustained burns to his nose, and his right hand and forearm.
More severe injuries in this industry (NAICS 332313)
A steel tube fell from a straddle truck onto an employee's foot, causing the steel toe of the employee's shoe to press into the employee's left foot. The employee sustained fractured phalanges and was hospitalized.
An employee was unloading materials from the back of a flatbed trailer. The employee fell off the back of the trailer approximately 4 feet to the ground below, resulting in a fractured left collarbone and fractured ribs. The employee was hospitalized.
An employee was bending material in a mechanical brake press when the press rotated and caught his right hand. His finger was crushed between the die and a steel plate, resulting in amputation of the finger.
The injured employee was assisting a co-worker to transfer a V-baffle (large piece of angle iron weighing 736 lbs.) into a vessel shell. The injured employee stepped off the end of the vessel and fell backward. The employee sustained a dislocated left shoulder, a fractured left wrist, a fractured lower right leg, and a laceration to the left eyebrow.
An employee was cutting a valve guard from an empty 5,000-gallon propane tank that had been cleaned and washed with water. Propane ignited, causing an explosion. The employee suffered a broken shoulder and a brain bleed.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.