Tyoga Container Company Inc

An employee was inside a building when a reversing forklift struck him and drove over his right leg. The employee was hospitalized with a fractured lower right leg.

An employee was toggling an air compressor when a nearby folder/gluer machine moved, causing a gear to strike the employee's finger. The employee sustained a partial amputation to the left middle finger.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

Two employees were removing a service lift platform from the back of a radar system. While handling the service lift platform, employee 2 was standing on the back of the radar and lost their footing, causing the service lift platform to shift and fall. The injured employee then fell from the top of the platform electronic subsystem (PES) to the floor, approximately 56 inches. The injured employee fractured his left elbow and left hip.

An employee fell from a loading dock to the ground 2-3 feet below. She suffered a compound fracture of the left hip and was hospitalized, requiring surgery.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.

An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.

An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.

An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.

An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.