Compressed between running equipment and other object(s) · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at DeWafelbakkers, 10000 Crystal Hill Rd, MAUMELLE, ARKANSAS 72113
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was operating a scissor lift to clean cobwebs on the ceiling when his left hand was caught between the scissor lift guard rail and a support beam on the ceiling. The employee sustained a partial amputation of his little finger and a laceration on the ring finger.
Amputation Other finger(s) n.e.c. Hoists, lifts scissor, telescoping
An employee was working to build an electrical substation. He was cleaning out the inside of a fixed section of a PVC pipe on the end that was furthest from an excavator. The excavator was outside of the trench and more than 25 feet away when it moved a pipe, pinching the employee's right arm between the two pipes. The employee's forearm was fractured.
An employee was anchored to a movable piece of equipment called a "lid" with a self-retracting lifeline harness. An overhead crane lifted the equipment, causing the employee to be pulled by his harness. The employee was pulled off the walkway and swung over the wall of the kiln. His body and head struck the wall. The employee lost consciousness and sustained a laceration to the side of his head that required stitches. The employee also sustained multiple fractured ribs and fractured vertebrae.
An employee was in a scissor lift, preparing to strip formwork from the underside of a concrete deck. As the lift was ascending, the employee's left little finger was pinched between the lift rail and the concrete beam above. The employee was hospitalized, and the soft tissue of their left little fingertip was amputated; the finger's bony tuft was also damaged.
An employee was operating an order picker when his left middle finger was crushed between the lift and storage racking. The employee's fingertip was amputated.
An employee was ascending in a scissor lift when his left thumb was caught between between the railing of the lift and a piece of equipment installed in the ceiling. The employee's thumb tip was amputated.
More severe injuries in this industry (NAICS 311812)
An employee (who had recently walked through water accumulated on the floor) slipped and fell to the floor. The employee suffered a broken right wrist and right elbow and was hospitalized, requiring surgery.
An employee was performing maintenance on a production line, requiring a testing and positioning phase for the whipped cream dispensers. The employee was positioning the dispensers using wrenches when one of the sensors was triggered by the pie pans coming down the line. The depositor heads lowered and pinched the employee's left ring finger, resulting in an amputated fingertip. The whipped cream dispensers were not guarded at the time and the line was not locked out/tagged out.
During a line changeover, an employee was rinsing a depositor with water. The employee was working to remove a piece of chocolate, stuck in the machine's roller, when the roller's moving parts caught his middle finger. He suffered an amputation to the fingertip with bone loss.
An employee was emptying a trash can into a dumpster. He tripped while turning around, fell over a rail onto the concrete floor, and broke bones in his back and wrist.
During a changeover, an employee was wiping down the dough chunker machine and the chunker closed on his left hand. The employee sustained crushing/laceration injuries, requiring hospitalization and surgery.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.